必赢电子游戏|登陆

LocationHome > Product > Photovoltaic components Potting with... > Infomation  

Solar energy converters dedicated...

Orginepoxy-cn.com | WriteAdmin | View | AddDate2010-6-25
Purchase, please contact Mr. Wang: 13771380144

Solar energy converters dedicated Potting of high thermal conductivity 87-3A/87-3B (epoxy type)

 

One, Introduction: 
Sclerosis in low-temperature solar power converters dedicated Potting Bicomponent sclerosis is a potting material, after curing it in the dense solid structure, with good flexibility, high thermal conductivity, and protective, waterproof , the role of the Security Chip.

Two, conventional performance:

Test items

Testing methods or conditions

87-3A

87-3B

Appearance

Visual

Black viscous liquid

transparent liquid

Density

25 g/cm3

1.5~1.5

1.00~1.10

Viscosity

40 mpa·s

7000~11000

20~30

Storage period

Room ventilation

6 months

6 months

Three, the use of technology:

Item

Unit or the conditions of

87-3A/87-3B

Mixing ratio 

Weight ratio 

100:20

Can use the time 

25棬min

0.5

Curing conditions

/hrs

25/7270~80/6~4

  • Note :87-3A because of the larger viscosity, the use of the best pre-80 degrees before / 2 hours pre-baking to-thinning, in order to operate.

Four, use: apply to solar energy conversion, sensors, circuit modules, such as mixed high heat of the casting components.

Five,  Characteristics after curing 

Item

Unit or the conditions of

87-3A/87-3B

Thermal conductivity

W(m·K)

0.8

Linear expansion coefficient

m/(m·K)

≤1.2×10-4

Hardness

Shore-D

65

Heat distortion temperature (HDT)

63

Volume resistivity

25棬Ω·cm

1.0×1014

Dielectric Strength

25棬kV/mm

15

Impact strength

Kg/cm2

7

Permittivity

25棬1MHZ

4.0±0.05

Dielectric Loss Tangent

25棬1MHZ

0.02

Use temperature range

-40~130

Flame retardant

-

94 V-1

Six, storage, transportation and Cautions: 
1. Such products of non-dangerous goods, as a general storage and transportation of chemicals, product packaging, see barrels of storage period. 
2. Please see the product model, and then pigeon-holing; accurate weighing, please give full uniform mixing. 
3. When potting impregnation speed not too fast, in order to ensure uniform impregnation. 
Seven, packaging specifications: Packing for A: 25KG or B: 5KG.

Note: The above performance data for the product in 70% humidity, the temperature at 25 typical testing data, only use customer information and can not guarantee that in a particular environment can be achieved when all the data. Please use customers to the measured data.

Copyright © www.epoxy-cn.com All Rights Reserved
Powered By eims_cms V 3.3
֧EIMSɾллEIMS